Tie swim trunks

Why it’s important to tie your swim trunks correctly

The tie on a pair of swim trunks is more important than you might think. Ties on sweatpants or regular shorts are often just ascetic and aren’t really needed at the end of the day. However, with swim trunks, it’s another story. 

First of all, once your swim trunks or board shorts get wet they will become much heavier. If you haven’t tied your trunks correctly you can be sure to lose your swim trunks as soon as you try to stand up. This is not what you want at the pool club or after falling off your board. 

Secondly, when wearing your swim trunks you are most likely jumping in the waves, going down a water slide, or surfing the waves. These are all activities where you move around a lot and you really want your swim trunks to stay in place. That’s why the right way to tie swim trunks is key. 

As you see, not tying your swim trunks correctly can be very embarrassing at the beach. So make sure you tie your swim trunks properly before leaving home! 

Tying board shorts is very easy when you know how to do it. So don’t be afraid to take the draw sting out of your board shorts and tie it back together. Once you got a hold of it you’ll know it for good!

Making sure you tie your board shorts is important because it will prevent them from falling off when you’re in the water. When you tie your board shorts it will also make sure they don’t get caught on something when you’re surfing or paddling.

Tying board shorts is an essential part of every surfer’s routine and it’s something you should learn how to do as soon as possible!

How to tie swim trunks tighter

Sometimes you have a pair of swim trunks that are just a little too big. Maybe you’ve lost some weight or perhaps your swim trunks have stretched after many trips to the beach. Whatever the reason, you might end up wanting to tie your swim trunks tighter. 

There is a fantastic way to tie swim trunks tighter by doing a special knot. This way of tying also makes it possible to adjust how tight we want our shorts. You can loosen or tighten the trunks throughout the day as you need. 

To tie your swim trunks tighter first make an ”&” figure with the left drawstring. Then with your right drawstring, make a loop and insert it into the nearest side of the ”&”. Continue to pass the right drawstring over the left side of the ”&”. Finally, pull it all tight. 

By gathering up your left drawstring you can now adjust the waist size by pulling your right drawstring. 

How to tie board shorts tighter

To begin, you should lay your swim trunks on a flat surface. The first time through, you want to be able to see all of the holes and where you’re putting the string. Then, once you feel more comfortable, you can try it while wearing the swim trunks.

The next step is unlacing the swim trunks. You should have no problem unlacing your swim trunks, and the string should be easy to reinsert into the holes. You’re now ready to begin re-lacing your swim trucks.

For the purposes of this article, the side that typically faces your body is the ‘back.’ In contrast, the side that faces away from your body is the ‘front.’ You can use this method even if you’re looking up how to tie swim trunks with six or more holes for the lacing.

You will now run the string through the bottom hole on the left side as you’re looking at the shorts. You should do this from back to front, just like you would lace a shoe. You want to pull enough string through that you do not need to worry about needing to redo this.

Then, take the other end of the string and run it through the top hole from back to front. This step takes place on the same side of your swim trunks as the first. When you are done, you should even out the lengths of each string side.

Now, you want to thread the string through the other side. Beginning at the bottom hole, take your string length straight across and through the bottom hole on the other side from back to front. Repeat this step with the top string length going through the top hole.

From there, you can use the same knot you use to tie shoes to ensure a tight tie on your swim trunks. That’s all the necessary steps, and you can now untie the knot, slide the swim trunks on, and enjoy the water confident in how you tie your swim trunks.

How to put the drawstring back into swim trunks

Some swim trunks with drawstrings are secured in the back. This means that while you can tighten the swim trunks you can actually pull the whole string out. Unfortunately, most swim trunks do not have a secure drawstring.

Usually, this should not be a problem, but there are some cases when you might have accidentally pulled the drawstring out. This could for example happen when washing your swim trunks in the washer.

So then you wonder, how do I put the drawstring back into my swim trunks?

This is done with the help of a large safety pin.

1. Fasten the safety pin to one of the ends of your drawstring
2. Locate the eyelid and insert the safety pin
3. Move the pin around the waistline by pulling the fabric together
4. Continue around the whole waistline until the pin is out on the other side.
5. Adjust the drawstring to have the same length on both sides

Now you have put the drawstring back into your swim trunks!

---

Bestsellers

Read more

• Different types of men’s swim trunks
• Board shorts with and without liner [Complete guide 2022]
• Board shorts vs. swim trunks, what’s the difference?
• Best men’s swim shorts for your body type
• 8 things you need to know about Jon Olsson